LERRC-M12

SUPPLY VOLTAGE

• 10 to 30 VDC

• Polarity Protected

AMBIENT TEMPERATURE

• –40°C to 70°C (-40°F to 158°F)

CURRENT REQUIREMENTS

• 45mA (exclusive of load)

LIGHT IMMUNITY

• Responds to sensor’s pulsed modulated light source, resulting in high immunity to most ambient light

OUTPUT TRANSISTORS

• (1) NPN and (1) PNP output transistors

• Sensor outputs can sink or source up to 150mA (current limit)

• All outputs are continuously short circuit protected

PUSH BUTTON CONTROL

• Automatic setup routines based on web opacity

• One push button setup

• Pushing both buttons simultaneously inverts output

INDICATORS

• Green LED flashes when AUTOSET routine is activated and stays illuminated when AUTOSET is completed

• Red LED illuminates when sensor’s output transistors are “ON”. NOTE: The status of the output transistors

can be inverted by pushing both buttons simultaneously. If Output LED flashes, a short circuit condition exists.

RUGGED CONSTRUCTION

• Chemical resistant high thermoplastic PPS housing

• Waterproof, ratings: NEMA 4 and IP66

• Conforms to heavy industry grade CE and UL requirements

RESPONSE TIME

• Light state response = 100 microseconds

• Dark state response = 100 microseconds

DIMENSIONS:

• Width: 2.715in (69.0mm)

• Height: 1.715in (43.6mm)

• Depth: .64in (16.3mm)

LED LIGHT SOURCE

• High intensity red LED

• Pulse modulated

HYSTERESIS

• Minimal hysteresis promotes the detection between the backing material and the label depending on the settings