New product
The LABEL EYE™ is a photoelectric sensor designed specifically to sense a large variety of adhesive labels. Since the LABEL EYE™ is an automatic one-touch sensor… not the conventional "teach mode" sensor, set-up is simple. Position the gap between the labels directly under the sensor's sight-guide and push the Autoset button. The sensor does the rest, adjusting itself to the perfect setting.
Warning: Last items in stock!
Availability date:
By buying this product you can collect up to 3 loyalty points. Your cart will total 3 loyalty points that can be converted into a voucher of 3,00 €.
Series | LABEL EYE |
Design | Slot sensor |
Operating voltage | 10-30 VDC |
Output function | NPN/PNP |
Electrical connection | M12 connector |
Housing material | Plastic |
Operating temperature | -40°C to +70°C |
Protection | IP66 |
LERRC-M12 - Label-Eye, 5-Pin,M12 connector, with Autoset
SUPPLY VOLTAGE • 10 to 30 VDC • Polarity Protected |
AMBIENT TEMPERATURE • –40°C to 70°C (-40°F to 158°F) |
CURRENT REQUIREMENTS • 45mA (exclusive of load) |
LIGHT IMMUNITY • Responds to sensor’s pulsed modulated light source, resulting in high immunity to most ambient light |
OUTPUT TRANSISTORS • (1) NPN and (1) PNP output transistors • Sensor outputs can sink or source up to 150mA (current limit) • All outputs are continuously short circuit protected |
PUSH BUTTON CONTROL • Automatic setup routines based on web opacity • One push button setup • Pushing both buttons simultaneously inverts output |
INDICATORS • Green LED flashes when AUTOSET routine is activated and stays illuminated when AUTOSET is completed • Red LED illuminates when sensor’s output transistors are “ON”. NOTE: The status of the output transistors can be inverted by pushing both buttons simultaneously. If Output LED flashes, a short circuit condition exists. |
RUGGED CONSTRUCTION • Chemical resistant high thermoplastic PPS housing • Waterproof, ratings: NEMA 4 and IP66 • Conforms to heavy industry grade CE and UL requirements |
RESPONSE TIME • Light state response = 100 microseconds • Dark state response = 100 microseconds |
DIMENSIONS: • Width: 2.715in (69.0mm) • Height: 1.715in (43.6mm) • Depth: .64in (16.3mm) |
LED LIGHT SOURCE • High intensity red LED • Pulse modulated |
HYSTERESIS • Minimal hysteresis promotes the detection between the backing material and the label depending on the settings |
No customer reviews for the moment.