Zobacz większe

LERC

Stan: Nowy produkt

The LABEL EYE® is a photoelectric sensor designed specifically to sense labels on a roll. Since the LABEL EYE® is a one-touch AUTOSET sensor and not the conventional "teach mode" sensor, set-up is simple.

Więcej szczegółów

Kupując teraz ten produkt otrzymasz 3 punktów lojalnościowych. Twój koszyk wyniesie 3 punktów lojalnościowych które mogą być zamienione na jeden bon o wartości 3,00 €.

Usuń ten produkt z moich ulubionych.
Dodaj ten produkt do moich ulubionych
Drukuj

Opis

Seria	LABEL EYE
Obudowa	Szczelinowa
Napięcie zasilania	10-30 VDC
Polaryzacja	NPN/PNP
Połączenie elektryczne	Złącze M8
Materiał obudowy	Tworzywo sztuczne
Temperatura pracy	-40°C do +70°C
Stopień ochrony	IP66

Więcej informacji

The LERC is in the LABEL EYE™ family. The LABEL EYE™ is a photoelectric sensor designed specifically to sense a large variety of adhesive labels. Since the LABEL EYE™ is an automatic one-touch sensor… not the conventional "teach mode" sensor, set-up is simple.

LER

SUPPLY VOLTAGE: 10 to 30 VDC Polarity Protected	AMBIENT TEMPERATURE: -40ºC to 70ºC (-40ºF to 158ºF)
CURRENT REQUIREMENTS: 45 milliamps (exclusive of load)	Hysteresis Minimal Hysteresis promotes the detection between the backing material and the label depending on the settings
OUTPUT TRANSISTORS: (1) NPN and (1) PNP sensor output transistors Outputs sink or source up to 150 milliamps (current limit) All outputs are continuously short circuit protected	PUSH BUTTON CONTROL: Automatic set-up routines based on web opacity One push-button set-up Simultaneously pushing both buttons inverts the output
RESPONSE TIME: Light state response = 100 microseconds Dark state response = 100 microseconds	RUGGED CONSTRUCTION: Chemical resistant to harsh cleaners such as detergents, alcohols, and ketones. Conforms to heavy industry grade CE requirements
LED LIGHT SOURCE: High Intensity Red= 660nm Pulse Modulated

Opinie

Na razie nie dodano żadnej recenzji.

Pobierz

LABEL EYE

Katalog

Pobierz (990.62k)