> >>>LER
LER Zobacz większe

LER

Nowy produkt

The LABEL EYE® is a photoelectric sensor designed specifically to sense labels on a roll. Since the LABEL EYE® is a one-touch AUTOSET sensor and not the conventional "teach mode" sensor, set-up is simple. Position the gap between the labels directly under the sensor's sight guide and push the "Normal" or "Translucent" button. The sensor does the rest, adjusting itself to the perfect setting.

Więcej szczegółów

Kupując teraz ten produkt otrzymasz 3 punktów lojalnościowych. Twój koszyk wyniesie 3 punktów lojalnościowych które mogą być zamienione na jeden bon o wartości 3,00 €.


Opis

Seria LABEL EYE
Obudowa Szczelinowa
Napięcie zasilania 10-30 VDC
Polaryzacja NPN/PNP
Połączenie elektryczne Przewód
Materiał obudowy Tworzywo sztuczne
Temperatura pracy -40°C do +70°C
Stopień ochrony IP66

Więcej informacji

The LER is in the LABEL EYE™ family. The LABEL EYE™ is a photoelectric sensor designed specifically to sense a large variety of adhesive labels. Since the LABEL EYE™ is an automatic one-touch sensor… not the conventional "teach mode" sensor, set-up is simple.

LER

SUPPLY VOLTAGE:
10 to 30 VDC Polarity Protected

AMBIENT TEMPERATURE:
-40ºC to 70ºC (-40ºF to 158ºF)

CURRENT REQUIREMENTS:
45 milliamps (exclusive of load)

Hysteresis
Minimal Hysteresis promotes the detection between the backing material and the label depending on the settings

OUTPUT TRANSISTORS:
(1) NPN and (1) PNP sensor output transistors
Outputs sink or source up to 150 milliamps (current limit)
All outputs are continuously short circuit protected

PUSH BUTTON CONTROL:
Automatic set-up routines based on web opacity
One push-button set-up
Simultaneously pushing both buttons inverts the output

RESPONSE TIME:
Light state response = 100 microseconds
Dark state response = 100 microseconds

RUGGED CONSTRUCTION:
Chemical resistant to harsh cleaners such as detergents, alcohols, and ketones.
Conforms to heavy industry grade CE requirements

LED LIGHT SOURCE:
High Intensity Red= 660nm
Pulse Modulated

 

Opinie

Na razie nie dodano żadnej recenzji.

Napisz opinię

LER

LER

The LABEL EYE® is a photoelectric sensor designed specifically to sense labels on a roll. Since the LABEL EYE® is a one-touch AUTOSET sensor and not the conventional "teach mode" sensor, set-up is simple. Position the gap between the labels directly under the sensor's sight guide and push the "Normal" or "Translucent" button. The sensor does the rest, adjusting itself to the perfect setting.

Pobierz

LABEL EYE

Katalog

Pobierz (990.62k)