E800-0015T3

Input:

• Voltage: Three-phase 400V AC ± 15%
• Frequency: 50/60 Hz ± 5%
• Input type: NPN / PNP

Output:

• Voltage: Three-phase 0-400 V AC
• Frequency: 0.0 - 650 Hz (resolution 0.01 Hz)
• 1 analog output
• 1 digital output

Current: 4A

Housing: rectangular E2

Housing material: plastic

Housing size: 106 x 150 x 180 mm (W x D x H)

Frequency setting resolution:

• Digital reference: 0.01 Hz
• Analog reference: fmax * 0.1%

Control Type: VVVF (Variable Voltage Variable Frequency)

 U / f control:

• Linear characteristics,
• Square characteristics,
• Characteristics freely defined

Torque boost:

• auto gain,
• manual amplification in the range of 0.1 - 30%

Frequency: 3 kHz - 12 kHz

Braking: DC current with optimized braking energy

PI regulator: built-in

Multi-speed operation: user-programmable output frequency according to process requirements

Frequency setting:

• buttons on the panel
• analog signal voltage or current
• via the RS485 communication interface
• from the "UP" and "DOWN"
• mixed signal

Start / Stop:

• via operator panel
• via RS485 communication link
• via terminal block

Protective functions:

• power supply phase failure
• too low supply voltage
• over-voltage, over-current
• overload of the frequency inverter
• overload (overheating) of the motor
• contactor monitoring
• bad user password
• incorrect current measurement
• problem with the peripheral device

Display Indication (4 LEDs):

• frequency of operation
• rotational speed or linear
• output current or output voltage
• error codes, function codes, and function values
• temperature

Electrical connection: 2.5 mm² cord

Operating temperature: -10 ° C ÷ + 50 ° C

IP20 according to EN 60529: 2003

Manufacturer: Eura Drives

Additional information:

• Built-in RFI filter, braking module, RS-485 communication with ModBus protocol,
• 2 years warranty (24 months)