New product
EZ-EYE™ miniature photoelectric sensors fulfill the need for an affordable, push-button sensor that is EZ to align and EZ to adjust. Optimized for machine control automation, the setup is easy with the unique one-touch AUTOSET routine. Simply place the sensor in the Light State condition and push the button once for a perfect setting.
Warning: Last items in stock!
Availability date:
By buying this product you can collect up to 2 loyalty points. Your cart will total 2 loyalty points that can be converted into a voucher of 2,00 €.
Series | EZ-EYE |
Design | Rectangular |
Operating voltage | 10-24 VDC |
Output function | NPN/PNP |
Electrical connection | Cable |
Housing material | Plastic |
Operating temperature | -40°C to +70°C |
Protection | IP67 |
The PZRF4 is an EZ-EYE photoelectric sensor that fulfills the need for an affordable, push-button sensor that is EZ to align and EZ to adjust.
This sensor has a red light source (880 nm) and a 6' cable.
The F4 Glass Fiberoptics block adapts for use with a wide variety of glass fiberoptic light guides (.187 O.D.) for both the proximity and opposed sensing modes.
SUPPLY VOLTAGE • 10 to 24 VDC • Polarity Protected |
CURRENT REQUIREMENTS • 50mA (exclusive of load) |
DIAGNOSTIC INDICATORS • Dual Red/Green LED Red = Output Status NOTE: If Output LED flashes, a short circuit condition exists. Green = Flash Rate Alignment Indicator • Dual Green/Amber LED Green = “ON” After AUTOSET™ Routine Amber = “ON” After Excess Gain Adjustment |
PUSH BUTTON CONTROL • AUTOSET Routine: Push and release with sensor in “light” state • Excess Gain Adjustment: Tap twice to step to higher excess gain • Push and hold to activate Flash Rate Alignment Indicator • Light /Dark “ON” selection: Tap 5 times to toggle |
RESPONSE TIME • Light State response = 500 microseconds • Dark State response = 500 microseconds |
RANGE • Dependent on optical block (see range guidelines) |
LED LIGHT SOURCE • Red = 660nm • Infrared = 880nm • Pulse Modulated |
LIGHT IMMUNITY • Responds to sensor’s pulse-modulated light source, resulting in high immunity to most ambient light, including high intensity strobes. |
HYSTERESIS • Approximately 15% of signal |
AMBIENT TEMPERATURE • -40°C to 70°C (-40°F to 158°F) |
OUTPUT TRANSISTORS • (1) NPN and (1) PNP sensor output transistor • Sensor’s output can sink or source up to 150mA (current limited) • Outputs are continuously short-circuit protected |
RUGGED CONSTRUCTION • Chemical resistant, high impact polycarbonate housing • Waterproof ratings: NEMA 4, IP67 • Conforms to heavy industry grade CE requirements |
No customer reviews for the moment.