View larger
PZRCO5
New product
EZ-EYE™ miniature photoelectric sensors fulfill the need for an affordable, push-button sensor that is EZ to align and EZ to adjust. Optimized for machine control automation, the setup is easy with the unique one-touch AUTOSET routine. Simply place the sensor in the Light State condition and push the button once for a perfect setting.
By buying this product you can collect up to 2 loyalty points. Your cart will total 2 loyalty points that can be converted into a voucher of 2,00 €.
- Remove this product from my favorite's list.
- Add this product to my list of favorites.
Data sheet
| Series | EZ-EYE |
| Design | Rectangular |
| Range (mm) | 914,4 |
| Operating voltage | 10-24 VDC |
| Output function | NPN/PNP |
| Electrical connection | M8 connector |
| Housing material | Plastic |
| Operating temperature | -40°C to +70°C |
| Protection | IP67 |
More info
The PZRCO5 is an EZ-EYE photoelectric sensor that fulfills the need for an affordable, push-button sensor that is EZ to align and EZ to adjust.
This sensor has a connector and a red light source (880 nm).
The O5 Proximity Narrow Beam Optical Block is useful in long-range sensing of medium to large size objects.
|
SUPPLY VOLTAGE • 10 to 24 VDC • Polarity Protected |
CURRENT REQUIREMENTS • 50mA (exclusive of load) |
|
DIAGNOSTIC INDICATORS • Dual Red/Green LED Red = Output Status NOTE: If Output LED flashes, a short circuit condition exists. Green = Flash Rate Alignment Indicator • Dual Green/Amber LED Green = “ON” After AUTOSET™ Routine Amber = “ON” After Excess Gain Adjustment |
PUSH BUTTON CONTROL • AUTOSET Routine: Push and release with sensor in “light” state • Excess Gain Adjustment: Tap twice to step to higher excess gain • Push and hold to activate Flash Rate Alignment Indicator • Light /Dark “ON” selection: Tap 5 times to toggle |
|
RESPONSE TIME • Light State response = 500 microseconds • Dark State response = 500 microseconds |
RANGE • Dependent on optical block (see range guidelines) |
|
LED LIGHT SOURCE • Red = 660nm • Infrared = 880nm • Pulse Modulated |
LIGHT IMMUNITY • Responds to sensor’s pulse-modulated light source, resulting in high immunity to most ambient light, including high intensity strobes. |
|
HYSTERESIS • Approximately 15% of signal |
AMBIENT TEMPERATURE • -40°C to 70°C (-40°F to 158°F) |
|
OUTPUT TRANSISTORS • (1) NPN and (1) PNP sensor output transistor • Sensor’s output can sink or source up to 150mA (current limited) • Outputs are continuously short-circuit protected |
RUGGED CONSTRUCTION • Chemical resistant, high impact polycarbonate housing • Waterproof ratings: NEMA 4, IP67 • Conforms to heavy industry grade CE requirements |
Reviews
No customer reviews for the moment.
